服务电话:0553-8523136

一、概述(summary)
  GD型系列管状带式输送机(简称管带机)是引进日本普利司通公司的专利技术(该专利技术已在世界32个国家申请专利注册)。该系列产品适用于各种复杂地形条件下输送密度为0-250kg/m的各种散状物料,采用普通管状胶带工作环境温度使用范围-25~+40℃;对具有耐热、耐寒、防水、防腐、防暴、阻燃等条件要求者,工作环境温度使用范围-35℃~+200℃。该产品可广泛应用于电力、建材、化工、矿山、冶金、码头、港口、煤炭粮食等行业物料输送系统。私彩平台可根据用户要求,进行地形勘测、系统设计、制造、安装、调试、售后等技术支持,并为用户提供全过程的服务。

       Belt conveyor GD series is the introduction of Japanese Bridgestone Corp patent (the patent technology has been in 32 countries in the world to apply for a patent registration). This series of products applicable to a variety of complex terrain conditions for 0-250kg/m transmission density of various bulk materials, using ordinary tubular belt working environment temperature range -25 ~ +40 degree; with heat resistance, cold resistant, waterproof, anti-corrosion, anti riot, fire and other requirements, the working environment temperature range of -35 to +200 DEG C. The product can be widely used in electric power, building materials, chemical industry, metallurgy, mines, ports, docks, food and other industries of coal conveying system. We can according to user requirements, the terrain survey, system design, manufacturing, installation, commissioning, technical support and customer service, provide the service for the user.

二、性能特点(performance characteristics)
1、可在水平平面和竖直平面拐弯,也可同时在水平平面和竖直平面拐弯,水平方向最大弯折角度达90度。最小弯曲半径为管径的300倍;

     In the horizontal plane and vertical plane bend, but also at the same time in the horizontal plane and vertical plane bend, horizontal direction the maximum bending angle of 90 degrees. The minimum bending radius is 300 times the diameter;  

2、运输过程中对环境的污染小。管式皮带机基本上是密封物料运行,并可省去建皮带运输机廊道的费用,防止在运送物料过程中污染环境;

    The environment pollution during transportation is small. Tubular belt conveyor basically is the operation of sealed materials, and it can save the cost of building belt conveyors corridors, so as to prevent polluting the environment during transporting materials.
3、胶带被六只托辊强制卷成圆管状,无输送带跑偏的情况,管带机可实现立体螺旋状弯曲布置,一条管状带式输送机取代一个由多条普通胶带机组成的输送系统。可节省土建(转运站)、设备投资(减少驱动装置数量),并减少了故障点,及设备维护和运行费用; 

      By six tape roller forced rolled into tubular, no conveying belt deviation, pipe belt machine can realize three-dimensional spiral bending arrangement, a tubular belt conveyor to replace a made up of a number of common tape machine delivery system can save construction (transfer station), equipment investment (reduce the number of driving device), and reduce fault, and equipment maintenance and operation cost;
4、输送带形成圆管状而增大了物料与胶带间的磨擦系数,故管状带式输送机的输送倾角可达30度,可减少了胶带机的输送长度,节省了空间位置和降低了设备成本,可实现大倾角(提升)输送;

      The conveyor belt forms a circular tube and increases the friction coefficient between the material and the tape. Therefore, the conveying angle of the tubular belt conveyor can reach 30 degrees, which can reduce the conveying length of the belt conveyor, save the space location and reduce the cost of the equipment, and achieve the transportation of large angle (lifting).
5、管带机的上、下分支包裹形成圆管形,故可用下分支反向输送与上分支不同的物料(但要设置特殊的加料装置);

     The upper branch of the pipe belt, the lower branch package forms a circular tube, so the lower branch can be used to reverse the transfer of different materials with the upper branch (but the special feeding device should be set up).
6、由于输送带形成管状,桁架宽度较相同输送量的普通带式输送机栈桥窄,减少占地和费用。

    The ordinary belt conveyor with the same width of the truss is narrower than the common belt conveyor with the same width of the truss, which reduces the land occupation and cost due to the pipe shape of the conveyer belt.




三、产品规格及参数选择(Selection of product specifications and parameters)



联系我们

地址:安徽新芜经济开发区西区经东路2158号
电话:0553-8523136
传真:0553-8523137
国内销售 E-mail:
ahbtxs@whbetter.com
国外销售 E-mail:
sterling.wang@whbetter.com
网站首页|关于百特|私彩平台|彩票中心|客户留言|在线订购|联系我们