服务电话:0553-8523136

N-GTD钢芯胶带斗式提升机 Bucket Elevator N-GTD Series

发布时间:2017-12-06 15:20:30 点击量:


   
   

      N-GTD芯腔带斗式提升机牵引构件采用高强度钢丝绳芯橡胶带,克服丁链条与轮啮合时驱动产生的动载荷,较链条提升更轻便,工作平稳,能以较快的运行速度而达到较高的生产率,在同样的生产条件下,胶带因其工作速度高和自重较轻,可使物料线载荷和牵引构件的线载荷较小从而减少整机的尺寸、自重。同时,由于腔带具有良好的弹性,柔韧性,在料斗进行装载时有减振作用。因采用了高强度钢丝绳芯腔带,可健提升机的提升高度及输送量大为提高,固而该产品具有良好的发展前景。

     Bucket elevator N-GTD series traction component with high strength steel wire rope core rubber belt, chain and gear d overcome when driving the dynamic load, a chain lift more portable, stable work, able to run faster and achieve higher productivity, in the same production conditions, because of the tape high speed and light weight, can make the material line load and line load traction components to reduce the size and weight. At the same time, because the cavity with good elasticity, flexibility in the hopper for loading a damping effect. The use of high strength steel wire rope core cavity zone, promote health the height and the delivery machine is greatly improved, and the solid product has good prospects for development.

   
1、运行部件:采用特殊设计,带防撕裂的高强度钢丝绳芯胶带,配以专用的胶带接头和料斗固定件使胶带能长期可靠运行,科斗设计布局合理,并有不同型式排列,确保物料连续提升和卸出。(Operation of components: the use of special design, high strength steel cord belt with anti tear, with special tape joints and fixed hopper of the belt can be long-term reliable operation, bracket design layout is reasonable, and there are different types of arrangement, ensure material continuous upgrading and unloading.)
 2、驱动装置:采用直交轴硬齿面的减速机与提升机主轴直联,配液力偶合器,慢速检修电机和逆止器,传动装置结构紧凑合理,实现柔性起动。( the driving device: the straight reducer shaft hard face reducer is directly linked to the main shaft of the hoist, the hydraulic coupling is used, the motor and the backstop are slowly repaired, the transmission device is compact and reasonable, and flexible start is achieved.)
 3、上部装置:滚筒设计采用自动对中装置,滚筒采用高性能橡胶包胶,使用寿命长,摩擦力大:(upper device: the roller is designed with automatic middle device, and the roller is used for high performance rubber, long service life and great friction.)
 4、中部机壳:采用优化设计机壳,双通道设计,避免相对高速运行的胶带带来的涡流干扰,附设加强角钢。( central shell: using the optimized design of the casing and double channel design to avoid the eddy current caused by the relatively high speed running tape, and to attach the reinforced angle steel.)
 5、下部装置:采用螺旋弹簧自动配重张紧装置,同步调节张紧,尾部滚筒采用自动对中设计,并附设皮带防跑偏装置和料位控制仪。(The lower part is made up of coil spring automatic weight tightening device, synchronous adjustment and tension, the tail drum is designed by automatic alignment, and the belt anti deviation device and material level controller are attached.)
 6、保护装置:本机在头、尾部设置有防跑偏装置,在胶带跑偏时可输送信号至中控室,及时切断主电机电源:在提升机的尾部设有料位控制仪及旋转开关。
(Protection device: the machine has anti deviation device installed in the head and tail. When the tape is running off, it can send signals to the central control room, and timely cut off the main motor power: there is a material level controller and a rotary switch at the rear of the hoist.)
 
头部滚筒(head drum)

 
尾部滚筒(stern barrel)

技术参数( technical parameter)

斗宽(Bucket width)(mm)
250
315
400
500
630
料斗容积(bucket capacity)(L)
5
6.5
14.6
18
29
输送量(delivery value)
φ=100%
85
117
225
280
450
m3/h
φ=75%
63
88
168
210
338
提升高度(hoisting crane depth)(m)
>100
>100
>100
>100
>100
斗宽(Bucket width)(mm)
800
1000
1250
1400
1600
斗料容积(bucket capacity)(L)
37
58
73
99
114
输送量(delivery value)
φ=100%
570
950
1255
1547
1780
m3/h
φ=75%
428
712
941
1160
1335
提升高度(hoisting crane depth)(m)
>100
>100
>100
>100
>100


联系我们

地址:安徽新芜经济开发区西区经东路2158号
电话:0553-8523136
传真:0553-8523137
国内销售 E-mail:
ahbtxs@whbetter.com
国外销售 E-mail:
sterling.wang@whbetter.com
网站首页|关于百特|私彩平台|彩票中心|客户留言|在线订购|联系我们