服务电话:0553-8523136

LS型高效螺旋输送机 Screw Conveyor LS Sreies

发布时间:2017-12-16 10:02:39 点击量:


   一、概述:(summary)

        Ls型高效螺旋输送机是等同采用国际标准ISO1050-75的产品。被广泛地使用在各种工业部门,如建材、电力、化工、冶金、煤炭、铝镁、机械、轻工、粮食及食品行业,适用于水平或小于20度倾角,输送粉状、粒状和小块状物料,如水泥、煤粉、粮食、化肥、灰渣、沙子等,物料韫度在200℃以下。 Ls型高效螺旋输送机是等同采用国际标准ISO1050-75的产品。被广泛地使用在各种工业部门,如建材、电力、化工、冶金、煤炭、铝镁、机械、轻工、粮食及食品行业,适用于水平或小于20度倾角,输送粉状、粒状和小块状物料,如水泥、煤粉、粮食、化肥、灰渣、沙子等,物料韫度在200℃以下。
Scre conveyor LS series is equal to the international standard ISO1050-75. The products are widely used in various industrial sectors, such as building materials, electric power, chemical industry, metallurgy, coal, aluminum and magnesium, machinery, light industry, food and food industry, suitable for horizontal or less than 20 degrees angle, conveying powdery, granular and small shape material, such as cement, coal, grain, fertilizer, ash, sand and other materials, "in 200 degrees Celsius.

    二、技术特点:(technical features)

    ■吊轴承寿命高:采用高洛冷硬铸铁,耐磨,高硬度,使用周期可确保两年无故障运行:该产品其中间吊轴承是引进德国的技术及自行开发的,超短距,寿命高,节能降耗显著,耐用、减低了维修费用;

    Long servise life: using chilled cast iron, high hardness, high wear resistance Rockwell, use cycle can ensure trouble free operation for two years: the product of the middle bearing is the introduction of German technology and developed the ultra short distance, high life, obvious energy saving, durable, reduce maintenance costs;

    ■结构紧凑:横截面尺寸矮小,布置紧凑,灵活,便于多点进料和卸料;

    Compact structure: small cross section size, compact layout, flexible, convenient for multi - point feeding and unloading;

    ■机构合理:本机的头节前部装有止推轴承,可承受移运物料时所产生的轴向力:在尾节后部装有滚动轴承,可以支撑螺旋轴和补充轴长的优点;

     Reasonable mechanism: the front of the machine is equipped with head thrust bearings can withstand axial displacement force generated when the material is transported: rolling bearings with the tail section in the rear, can support the helix axis and long axis of advantages;

    ■密封性能好:本机机壳型式有两种,u型机壳和圆形机壳,有效防止粉尘污染,是环保型的产品。

    Good sealing performance: This machine has two types, U-shaped casing and circular casing, can effectively prevent dust pollution, is environmentally friendly products.



    三、结构简介:( design feature )

    螺旋机通常由驱动装置、头节、标准中间节、选配节和尾节组成。每节中间节的螺旋与机壳可以互换。出料端螺旋有清料装置,安装时应注意出料端螺旋位置。输送原理:当螺旋轴转动时,由于物料的重力及其与槽体壁所产生的摩擦力,使物料只能在叶片的推送下沿着输送机的槽底向前移动;物料在中间轴承处的运移,则是依靠后面前进着的物料推力。

    The spiral machine comprises a driving device, usually the scolex, standard middle section, the matching section and the tail section. Each section of the middle section of the spiral casing and can be interchanged. The discharge end of a spiral cleaning device, the installation should pay attention to the discharge end of the spiral conveying principle: position. When the spiral shaft rotates, the friction material of gravity and the tank wall, the material only in the leaves of push along the conveyor trough moving forward; in the middle of the bearing material migration, is thrust forward behind the material rely on.

      基本参数( essential parameter )

螺旋直径mm(screw diameter) 100 160 200 250 315 400 500 630 800 1000 1250
螺距mm (screw pitch)
100 160 200 250 315 355 400 450 500 560 630
转速r/min(speed) 140 112 100 90 80 71 63 50 40 32 25
输送量m3/h(delivery value ) 2.2 8 14 24 34 64 100 145 208 300 338
转速r/min(speed) 112 90 80 71 63 56 50 40 32 25 20
输送量m3/h(delivery value ) 1.7 7 12 20 26 52 80 116 165 230 320
转速r/min(speed) 90 71 63 56 50 45 40 32 25 20 16
输送量m3/h(delivery value ) 1.4 6 10 16 21 41 64 94 130 180 260
转速r/min(speed) 71 50 50 45 40 36 32 25 20 16 13
输送量m3/h(delivery value ) 1.1 4 7 13 16 34 52 80 110 150 200

联系我们

地址:安徽新芜经济开发区西区经东路2158号
电话:0553-8523136
传真:0553-8523137
国内销售 E-mail:
ahbtxs@whbetter.com
国外销售 E-mail:
sterling.wang@whbetter.com
网站首页|关于百特|私彩平台|彩票中心|客户留言|在线订购|联系我们